RF LDS ZONE-NET
Laser sensorThe use of wireless laser sensors for long distances makes non-contact monitoring possible, detecting any objects independently of their colour, material or surface. This proves to be particularly advantageous in connection with large load carriers (LLC), pallets or other large means of transport.
The RF LDS ZONE guarantees the reliable detection of all types of object. It can be used, for example, to trigger an automatic requisition note as soon as a stock level reaches a pre-defined minimum.
Reliable monitoring over distances between 0.4 m and 5 m
Objects can be detected independently of their materials or surface
Flexible assembly using a universal bracket
Automatic requisition notes realisable
The sensors are mounted above field level and are therefore not a source of disturbance for humans or machines
Laser sensor
With the help of the RF 96 BU radio module, the wireless laser sensors can be integrated in the overall system. The sensors are parameterised online via the Sensor Bridge software.
The wireless laser sensors are typically mounted above field level, which guarantees that they will not, on the one hand, become damaged or, on the other hand, hinder staff or transport vehicles. The RF LDS-ZONE detects objects using a matrix of 8 x 4 measuring points. The size of the coverage area depends on the distance of the sensor from the object to be detected. The laser sensor is thus able to monitor the field of vision precisely thanks to the 32 measuring points. The minimum distance for calculation is 40 cm, the maximum distance for calculation is up to 5 m, depending on the colour and surface of the object.
The sensors are installed using a universal bracket. This facilitates flexible mounting and precise positioning of the sensors in different places, whether below the ceiling, on a wall or against another suitable surface. In this way, optimal adjustment to the specific requirements of the site is guaranteed.
Field of view calculator
The distance of the laser sensor and the size of the monitored area are directly interlinked by the opening angle of the sensor. With our field of view calculator you can quickly and easily calculate the required distance to maximize the efficiency and accuracy of your surveillance.
| Distance | a: | mm |
|---|---|---|
| FoV length | b: | mm |
| FoV width | c: | mm |
| Recommended object size (min.) | d: | mm |
Technical data
General technical data
Wireless range
5 m with sufficiently reflective targets
Minimum distance
40 cm, reduced accuracy with shorter distances
Accuracy
± 20 mm ± 2 %, at 3 m, white target
Field of view
12,4° x 5,4°
Enclosure
ASA polymer
Degree of protection
IP67
Ambient temperature
0 °C … +65 °C
Note
The data are only valid in combination with radio module RF 96 BU-NET-LDS!
Downloads
Product list
| Type | Article no. | ||
|---|---|---|---|
|
RF LDS ZONE-ST-NET | 1323312 | Data sheet |
|
RF LDS ZONE-ST/BU-NET | Data sheet |
